Plate-mounting adhesive tapes from AIPL give the right base for photopolymer printing plates, from hard to highly compressible. By using these tapes, the flexo printing quality is enhanced, dot gain is reduced. With foam backed tapes, fine halftone printing is possible. Various thickness & sizes available in d/s film based tape and d/s foam based materials.

Also Available D/s PVC filim based tapes for label printing.

P-310 (Plate Mounting Tape for "FLEXO" Printing Industry)
Description:
P-310 is a premium grade DS Adhesive Tape backed by PVC film & coated with Rubber Based & protected With the Creped PVC Film-mainly designed for plate mounting applications for Flexo Printing Industries.

Application:
P-310 is the right recommendation for MOUNTING OF PHOTO POLYMER PLATES on Printing Cylinder & Mylar Sheets during Book Printing & Flexography.Also used for Letter Press Printing in the Label Industry.Thickness available 0.10 mm.

P-43121(Double Sided Foam Plate Mounting Tape)
Description:
P-43121 is a double-sided foam tape especially designed for flex graphic plates mounting. It features a specially acrylic adhesive on its open (cylinder) side and a graphic grade acrylic adhesive on its closed (plates) side. P-43120 is reinforced with a polyester film and uses a white, smooth, siliconised , embossed PP release liner.

Application:
» Mounting of flexography photopolymer and rubber plates on to cylinders of sleeves, oven with small diameters for example in the label industry .
» P-43121 is designed for both half-tone and black printing. or a combination of both . When used on the same plates.

Benefits:
» Higher peel adhesion to most common plates.
» Lower face on plate side.
» The controlled adhesion on the cylinder side makes P-43121 versatile enough to be used for mounting of plates on to variety of sleeves.
» P-43121 ensures an easy mounting/demounting of the plates, remains in-site during print runs and provides residue-free removal after use.
» The embossed plastic liner used on P-43121 reduces the risk of air entrapment and allows bubble-free mounting of the plates, especially when this operation is done manually.

P-43200 (Double Sided Soft Foam Plate Mounting Tape)
Description:
P-43200 is a double-sided foam tape especially designed for flexographic plate mounting.Based on soft pink PE foam.It features especially acrylic adhesive on it's open cylinder side and a graphic grade acrylic adhesive on it's closed (plates) side.P-43200 is reinforced with polyester film and uses a white,smooth,siliconised,embossed PP release liner, having total thickness of 0.55 mm

Application:
» Mounting of flexographic photopolymer and rubber plates on to cylinders or sleeves.
» P-43200 is primarily designed for pure half-tone printing on to filmic substrates.
» P-43200 is particularly suitable for mounting soft to medium-hard photopolymer plates on to medium to large diameter cylinder or sleeves

Product Benefits:
» Differential adhesion.Standard adhesion and tack on the plates and controlled adhesion on the cylinder side,makes P 43200 versatile enough to be used for mounting a variety of plates on to steel cylinders or sleeves.
» P-43200 ensures easy mounting/demounting of the plates,perfect stability during long print runs and residue-free removal after use .
» The embossed plastic liner used on P-43200 reduces the risk of air entrapment and allows bubble-free mounting of the plates, especially when this operation is done manually
» Special soft PF foam designed for superior half-tone print results even at elevated machine speeds.
» The pink colour of the foam aids the quick identification of the foam hardness.

P-43220 (Double Sided Medium -soft Plate Mounting Tape)
Description:
P-43220 is a double-sided foam tape especially designed for flexographic plate mounting.It features especially acrylic adhesive on it's open cylinder side and a graphic grade acrylic adhesive on it's closed (plates) side.P-43220 is reinforced with polyester film and uses a white,smooth,siliconised,embossed PP release liner, having total thickness of 0.55 mm.

Application:
» Mounting of flexographic photopolymer and rubber plates on to cylinders or sleeves.
» P-43220 is designed for both half-tone and block printing or a combination of both,when used on the same plates.
» P-43220 is particularly suitable for mounting soft to medium-hard photopolymer plates on to medium to large diameter cylinder or sleeves

Product Benefits:
» Differential adhesion.Standard adhesion and tack on the plates and controlled adhesion on the cylinder side,makes P-43220 versatile enough to be used for mounting a variety of plates on to steel cylinders or sleeves.
» P- 43220 ensures easy mounting/demounting of the plates,perfect stability during long print runs and residue-free Removal after use.
» The embossed plastic liner used on P-43220 reduces the risk of air entrapment and allows bubble-free mounting of the plates, especially when this operation is done manually.
» Special PE foam designed for superior half-tone and combination print results even at elevated machine speeds.

P-43240 (Double Sided Hard Foam Plate Mounting Tape)
Description:
P-43240 is a double-sided foam tape especially designed for flexographic plate mounting.Based on hard blue PE Foam,Itfeatures especially acrylic adhesive on it's open cylinder side and a graphic grade acrylic adhesive on it's closed (plates) side.P-43240 is reinforced with polyester film and uses a white,smooth,siliconised,embossed PP release liner, having total thickness of 0.55 mm.

Application:
» Mounting of flexographic photopolymer and rubber plates on to cylinders or sleeves.
» P-43240 is particularly suitable for mounting soft to medium-hard photopolymer plates on to medium to large diameter cylinder.
» P 43240 is primarily designed for block/solid printing on filmic substrates,it can also be used for combination printing ,when half-tone and block prints are used on the same plates.

Product Benefits:
» P-43240 ensures easy mounting/demounting of the plates,perfect stability during long print runs and residue-free Removal after use.
» The embossed plastic liner used on P-43240 reduces the risk of air entrapment and allows bubble-free mounting of the plates, especially when this operation is done manually.
» Special PE foam designed for superior block/solid print results even at elevated machine speeds.
» The blue colour of foam aids the quick identification of the foam hardness.